Ayyub, B. M., and Wright, R. N., 2016. “Adaptive Climate Risk Control of Sustainability and Resilience for Infrastructure Systems,” Editorial, J Geography and Natural Disasters, 6(2), http://dx.doi.org/10.4172/2167-0587.1000e118.
Ayyub, B. M., Pantelous, A., and Shao, J., 2016. “Towards Resilience to Nuclear Accidents: Financing Nuclear Liabilities via Catastrophe Risk Bonds” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B: Mechanical Eng., DOI: 10.1115/1.4033518.
Gilbert, S., and Ayyub, B., 2016. “Models for the Economics of Resilience,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civil Eng., DOI: 10.1061/AJRUA6.0000867.
Ayyub, B. M., and Wehr, S. (2015) “Risk Models for Evaluation and Type Classification of Personal Flotation Devices,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B: Mechanical Eng., Vol. 1, DOI: 10.1115/1.4026399.
Ayyub, B. M., Stambaugh, K. A., McAllister, T. A., de Souza, G. F., and, D., 2015 “Structural Life Expectancy of Marine Vessels: Ultimate Strength, Corrosion, Fatigue, Fracture and Systems,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B: Mechanical Eng., Vol 1, DOI: 10.1115/1.4026396.
Lombardo, F. and Ayyub, B., 2015. “Analysis of Washington, DC, Wind and Temperature Extremes with Examination of Climate Change for Engineering Applications.” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civ. Eng., 10.1061/AJRUA6.0000812, 04014005.
Ayyub, B., 2014. “Introduction to the Aims and Scope of the Journal.” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civ. Eng., 10.1061/AJRUA6.0000001, 01614001. (same as Ayyub 2015)
Ayyub, B. M., Braileanu, H. G., and Qureshi, N., “Prediction and Impact of Sea Level Rise on Properties and Infrastructure of Washington, DC,” Risk Analysis Journal, Society for Risk Analysis, 2011 Oct 28, 1-18. doi: 10.1111/j.1539-6924.2011.01710.x. Picked up by ~300 media channels including CNN, Wall Street Journal, Washington Post, etc.
Shamoo, A. E., and Ayyub, B. M., “Benefit/Risk Estimates in Clinical Trials,” Drug Information Journal, Drug Information Association, 2011, 45, 1-7, 0092-8615/2011.
Ayyub, B. M., McGill, W. L., Foster, J., Jones, H. W., “Risk Analysis of a Protected Hurricane-Prone Region II: Computations and Illustrations,” ASCE Natural Hazards Review, May 2009, 54-67, DOI: 10.1061/(ASCE)1527-6988(2009)10:2(38).
Ayyub, B. M., Foster, J., McGill, W. L., “Risk Analysis of a Protected Hurricane-Prone Region I: Model Development,” ASCE Natural Hazards Review, May 2009, 38-53, DOI: 10.1061/(ASCE)1527-6988(2009)10:2(38).
Ayyub, B. M., McGill, W. L., Kaminskiy, M., “Critical Asset and Portfolio Risk Analysis for Homeland Security: An All-Hazards Framework,” Risk Analysis International Journal, Society for Risk Analysis, Vol. 27, No. 3, 2007, 789-801, DOI: 10.1111/j.1539-6924.2007.00911.x.
Assakkaf, I., and Ayyub, B. M., “Comparative and Uncertainty Assessment of Design Criteria for Stiffened Panels,” Journal of Ship Research, SNAME, September 2004, 48(3), 231-247.
Ayyub, B. M., “From Dissecting Ignorance to Solving Algebraic Problems,” J. Reliability Engineering and System Safety, July to September 2004, 85(1 to 3), 223-238.
Ayyub, B. M., “Elicitation of expert opinions for uncertainty and risks: Answer to the Book Review by Roger M. Cooke,” Fuzzy Sets and Systems Volume 133, Issue 2 16 January 2003, 269-271.
Akpan, U. O., Koko, T. S., Ayyub, B. M., and Dunbar, T. E., “Risk Assessment of Aging Ship Hull Structures in the Presence of Corrosion and Fatigue,” Marine Structures, 15(3), 2002, 211-232.
Sikora, J. P., Michaelson, R., and Ayyub, B. M., “Assessment of Cumulative Lifetime Seaway Loads for Ships,” Naval Engineers Journal, ASNE, 114(2), 2002, 167-180.
Hess, III, P. E., Bruchman, D. D., Assakkaf, I. A., and Ayyub, B. M., “Uncertainties in Material Strength, Geometric and Load Variables,” NEJ, ASNE, 114(2), 2002, 139-165.
Assakkaf, I., Ayyub, B. M., Hess, P., and Atua, K., “Reliability-Based Load and Resistance Factor Design (LRFD) Guidelines for Stiffened Panels and Grillages of Ship Structures,” Naval Engineers Journal, ASNE, 114(2), 2002, 89-111.
Assakkaf, I., Ayyub, B. M., Hess, III, P. E., and Knight, D. E., “Reliability-Based Load and Resistance Factor Design (LRFD) Guidelines for Unstiffened Panels of Ship Structures,” Naval Engineers Journal, ASNE, 114(2), 2002, 69-88.
Ziara, M., Nigim, K., Enshassi, A., and Ayyub, B.M., “Strategic Implementation of Urban Infrastructure Priority Projects in Palestine,” J. of Infrastructure Systems, ASCE, 8(1), 2002, 2-11.
Eloseily, K. H., Ayyub, B. M., and Patev, R. C., “Reliability Assessment of Pile Groups in Sand,” Journal of Structural Engineering, ASCE, 2002, 128(10), 1-8.
Blair, A. N., Ayyub, B. M., and Bender, W. J., “Fuzzy Stochastic Risk-Based Decision Analysis with the Mobile Offshore Base as a Case Study,” Int. Journal of Marine Structures, 14 (1&2), Jan. 2001, 69-88.
Inozu, B., and Ayyub, B.M., “Reliability, Maintenance and Risk Assessment in Naval Architecture and Marine Engineering Education in the US,“ European J. of Engineering Education, 24(3), 1999, 335-340.
Ayyub, B.M., Kaminskiy, M.P., Patev, R.C., Leggett, M.A., “Loads for Fatigue Life Assessment of Gates at Navigation Locks,” J. of Infrastructure Systems, ASCE, 1997, 3(2), 68-77.
Chao, R.-J., and Ayyub, B.M., “Reliability and Uncertainty Evaluation for Longitudinal Bending of Hull Girders of Surface Ships,” J. of Ship Research, SNAME, 4(1), March 1997, 57-68.
Johnson, P.A., and Ayyub, B.M., “Modeling Uncertainty in the Prediction of Pier Scour,” Journal of Hydraulic Engineering, ASCE, Feb. 1996, 122(2), 66-72.
Ayyub, B. M., Al-Mutairi, N.M., and Chang, P. C., “Splicing Strength of Welded Steel Mesh in Concrete Bridge Decks,” Journal of Structural Engineering, ASCE, 120(8), August 1994, 2532-2546.
Ayyub, B. M., Al-Mutairi, N.M., and Chang, P. C., “Bond Strength of Welded Wire Fabric in Concrete Bridge Decks,” Journal of Structural Engineering, ASCE, 120(8), August 1994, 2520-2531.
Ayyub, B.M., Sohn, Y.G. and Saadatmanesh, H., “Prestressed Composite Girders: Experimental Study for Negative Moment,” Journal of Structural Engineering, ASCE, October 1992, 118(10), 2763-2783.
Ayyub, B.M., Sohn, Y.G. and Saadatmanesh, H., “Prestressed Composite Girders: Analytical Study for Negative Moment,” Journal of Structural Engineering, ASCE, October 1992, 118(10), 2743-2762.
Johnson, P.A., and Ayyub, B.M., “Assessment of Time-Variant Bridge Reliability Due to Pier Scour,” J. of Hydraulic Engineering, ASCE, 118(6), June 1992, 887-903.
Ibrahim, A., and Ayyub, B.M., “Multi-Criteria Ranking of Components According to their Priority for Inspection,” Fuzzy Sets and Systems, North-Holland, 48(1), 1992, 1-14.
Eldukair, Z. A., and Ayyub, B. M., “Analysis of Recent U.S. Structural and Construction Failures,” Journal of Performance of Constructed Facilities, ASCE, 5(1), February 1991, 57-73.
McCuen, R.H., Ayyub, B.M., and Hromadka, T.V., “Risk of Debris Basin Failure,” Journal of Water Resources Planning and Management, ASCE, 116(4), July/August 1990, 473-483.
Ayyub, B.M., Ibrahim, A., and Schelling, D., “Post-tensioned Trusses: Analysis and Design,” Journal of Structural Engineering, ASCE, 116(6), June 1990, 1491-1506.
Balkey, K., Ayyub, B.M., Gore, B., Simonen, F., Harris, D., Smith, H., Karydas, D., “Risk-Based Inspection Guidelines – A Quantified Process to Supplement Engineering Judgment,” Mechanical Engineering, ASME, March 1990, 68-74.
Saadatmanesh, H., Albrecht, P., and Ayyub, B.M., “Experimental Study of Prestressed Composite Beams,” Journal of Structural Engineering, ASCE, 115(9), September 1989, 2348-2363.
Ayyub, B.M., White, G.J., and Purcell, E.S., “Estimation of the Structural Service Life of Boats,” Naval Engineers Journal, ASNE, 101(3), May 1989, 156-166.
McCuen, R. H., Aggour, M.S., and Ayyub, B.M., “Spacing for Accuracy in Ultrasonic Testing for Bridge Timber Piles,” Journal of Structural Engineering, ASCE, 114(12), December 1988, 2652-2668.
Chang, P.C., Ayyub, B.M., and Al-Mutairi, N., “Moment-Rotation Characteristic of Slabs,” International Journal of Software for Engineering Workstations, 3(3), July 1987, 124-128.
White, G.J., and Ayyub, B.M., “Reliability-Based Fatigue Design for Ship Structures, reply by the authors on comments by R. Sielski, P.Y. Chang and A. Thayamballi,” NEJ, ASNE, 99(4), July 1987, 128-130.